 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN7508 15C01SS NPN Epitaxial Planar Silicon Transistor 15C01SS Low-Frequency General-Purpose Amplifier Applications Applications * Package Dimensions unit : mm 2159A [15C01SS] Top View 1.4 Side View Low-frequency Amplifier, muting circuit. Features * * * * 0.3 Large current capacitance. Low collector-to-emitter saturation voltage (resistance). RCE (sat) typ.=0.58 [IC=0.7A, IB=35mA]. Ultrasmall, slim flat-lead package (1.4mm!0.8mm!0.6mm). Small ON-resistance (Ron). 0.3 0.25 0.1 3 0.8 1.4 Bottom View 1 0.45 0.2 2 0.07 Side View 3 0.6 1 : Base 2 : Emitter 3 : Collector SANYO : SSFP Specifications Absolute Maximum Ratings at Ta=25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Conditions Ratings 20 15 5 600 1.2 0.07 2 1 Unit V V V mA A mW C C Mounted on a glass epoxy board (20!30!1.6mm) 200 150 --55 to +150 Electrical Characteristics at Ta=25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Symbol ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) VCB=15V, IE=0 VEB=4V, IC=0 VCE=2V, IC=10mA VCE=2V, IC=50mA VCB=10V, f=1MHz IC=200mA, IB=10mA IC=200mA, IB=10mA 300 330 3.2 150 0.9 300 1.2 Conditions Ratings min typ max 0.1 0.1 800 MHz pF mV V Unit A A Marking : YP Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O3003 TS IM TA-100251 No.7508-1/4 15C01SS Continued from preceding page. Parameter Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf IC=10A, IE=0 IC=1mA, RBE= IE=10A, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Conditions Ratings min 20 15 5 30 77 40 typ max Unit V V V ns ns ns Switching Time Test Circuit PW=20s D.C.1% INPUT IB1 OUTPUT IB2 VR 50 + 220F VBE= --5V IC=20IB1= --20IB2=500mA + 470F VCC=5V RB RL 200 IC -- VCE 0.9 A 0.8m 800 IC -- VBE VCE=2V mA 180 0.7mA 700 Collector Current, IC -- mA Collector Current, IC -- mA 160 0.6mA 1.0mA 140 120 100 80 0.5mA 600 500 400 300 200 100 0.4mA 0.3mA 0.2mA 60 40 20 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1mA IB=0 1.8 2.0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT05491 Collector-to-Emitter Voltage, VCE -- V 1000 7 5 IT05490 1000 hFE -- IC Base-to-Emitter Voltage, VBE -- V VCE(sat) -- IC VCE=2V Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 5 3 2 25C DC Current Gain, hFE Ta=75C 3 2 --25C 100 7 5 3 2 100 7 5 3 1.0 = Ta C 75 C 5 --2 25 C 2 3 5 7 10 2 3 5 7 100 2 3 Collector Current, IC -- mA 5 7 1000 IT05492 10 1.0 2 3 5 7 10 2 3 5 7 100 Ta= 75 C 25C --25 C IC / IB=20 2 3 Collector Current, IC -- mA 5 7 1000 IT05493 No.7508-2/4 15C01SS 1000 7 VCE(sat) -- IC IC / IB=50 10000 7 VBE(sat) -- IC IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 5 3 2 100 7 5 3 2 = Ta 75 C 5C 1000 7 5 3 2 Ta= --25C 75C --2 C 25 25C 10 1.0 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05494 100 1.0 2 3 5 7 10 2 3 5 7 100 2 3 Collector Current, IC -- mA 10 Collector Current, IC -- mA 7 5 7 1000 IT05495 Cob -- VCB f=1MHz Gain-Bandwidth Product, fT -- MHz fT -- IC VCE=2V Output Capacitance, Cob -- pF 7 5 5 3 2 3 2 100 7 5 1.0 1.0 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 2 3 5 7 10 2 3 5 7 100 2 3 Collector-to-Base Voltage, VCB -- V 100 7 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 0.1 IT05497 250 Ron -- IB IN Collector Current, IC -- mA 5 7 1000 IT05496 PC -- Ta f=1MHz 1k 1k IB OUT Collector Dissipation, PC -- mW 200 M ON-resistance, Ron -- ou nt ed on 150 ag las se po xy 100 bo ard (2 0! 3 0! 50 1.6 m m ) 160 0 2 3 5 7 1.0 2 3 5 Base Current, IB -- mA 10 IT06067 7 0 20 40 60 80 100 120 140 Ambient Temperature, Ta -- C IT05520 No.7508-3/4 15C01SS Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2003. Specifications and information herein are subject to change without notice. PS No.7508-4/4 |
Price & Availability of 15C01SS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |